Saremco 3D print resins - sgdentalshop.com

Saremco Cronwtec & Denturetec

Saremco is a Swiss company with more than 30 years of experience in the production of various light-curing dental materials, so this expertise has been used for the crowntec and the denturetec. The crowntec materials have been developed on the Asiga 3D printers and are now compatible on the various 3D printers such as: ASIGA MAX UV & ASIGA, PRO 4K, Ackuretta SOL & DENTIQ, DentaFab SEGA, Desktop Health D4k, DMG 3Delite & 3Demax, MiiCraft Prime, NextDent nextdent 5100, Phrozen Sonic 4K, 2022 & Sonic 4K XL 2022, Prusa Medical One, Rapidshape D20 II; D30II; D40II; D10+; D20 + cartridge; D20+; D30+; D50+, Shining AccuFab D1S There is also a wide choice in the use of validated post-curing devices: OtoFlash NK-Optik, HiLite Power Heraeus Kulzer, CURIE Ackuretta, CURE DentaFab, Photopol Dentalfarm, BB Compact Meccatronicore, LC-3DPrint Box NextDent, Cure Phrozen, Medical CW One Prusa, RS Cure Rapidshape, Fab Cure Shining.

Saremco Print | CROWNTEC

The CROWNTEC is a superior quality 3D printing resin for the production of highly biocompatible permanent restorations.

For digital permanent crowns, inlays, onlays, veneers and artificial teeth
highly aesthetic single-phase material with perfectly matched opacity.

Excellent biocompatibility.
Quickly ready for use without long shaking
Flexural strength > 130 MPa
Elastic modulus: > 4000 MPa
Finishing with SAREMCO els paintart possible
Packaging bottle with content: 500 gr
Validated Devices: ASIGA MAX UV & ASIGA, PRO 4K, Ackuretta SOL & DENTIQ, DentaFab SEGA, Desktop Health D4k, DMG 3Delite & 3Demax, MiiCraft Prime, NextDent nextdent 5100, Phrozen Sonic 4K, 2022 & Sonic 4K XL 2022, Prusa Medical One , Rapidshape D20 II; D30II; D40II; D10+; D20 + cartridge; D20+; D30+; D50+, Shining AccuFab D1S

Download documents:

Videos:

VITA Shades:

REF 8063 A1
REF 8052 A2
REF 8051 A3
REF 8065 B1
REF 8066 SW
On request: A3.5, A4, B2, B3, C3, C4, D3

Order online: Saremco Crowntec

Saremco Print | DENTURETEC

DENTURETEC is a high-performance plastic for the production of highly biocompatible denture bases using the 3D printer “ASIGA MAX UV”.

For all types of dentures
Simple, fast and accurate in production
Excellent biocompatibility: demonstrably no residual monomers and MMA-free
Very good physical properties

Flexural strength: > 100 MPa
Elastic modulus: > 1000 MPa
Order unit: bottle
Content: 500 gr

Article number: 8062

Order online: Saremco Denturetec

Video's Saremco Crowntec & Denturetec

Below is an overview of the workflow regarding the Crowntec permanent crown and bridge materials. The videos are built up from an introduction video followed by the preparation for the Asiga Composer software, the after-treatment such as cleaning and the drawer curing up to the color realization. Watch the videos below for working with the Saremco Crowntec.

Introduction Saremco print Crowntec

2. Validation strategy of the Saremco Crowntec

3. Prepare print on the Asiga Max with the Saremco Crowntec

4. After “cleaning” the pint of Saremco Crowntec

5. After-treatment “after hardening” of the Saremco Crowntec

6. Finalizing the color of the Saremco Crowntec

7. Polishing the Saremco Crowntec